Back to Blog

GovRAMP vs FedRAMP: Which Authorization Actually Gets You to the Customer?

GovRAMP (formerly StateRAMP) and FedRAMP test the same NIST 800-53 controls, but a FedRAMP authorization fast-tracks GovRAMP while GovRAMP gets you only as far as FedRAMP Class A. What each one is, where states stand, and which to pursue first for your customer mix.

Quick Answer

GovRAMP (formerly StateRAMP) and FedRAMP test the same NIST 800-53 controls, but a FedRAMP authorization fast-tracks GovRAMP while GovRAMP gets you only as far as FedRAMP Class A. What each one is, where states stand, and which to pursue first for your customer mix.

If you sell software to government, someone has told you that you need FedRAMP. Someone else has told you to start with GovRAMP (formerly StateRAMP) because it’s faster and cheaper. Both pieces of advice can be right. Both can also send you down a year-long path that ends with an authorization your actual customers don’t accept.

The two programs test against the same NIST SP 800-53 controls. What differs is who runs them, who accepts the result, and which way credit flows between them. The right first move depends less on the programs than on who you are trying to sell to.

What each one is

FedRAMP is the federal government’s program for authorizing cloud services, run by GSA. Federal agencies use it to decide whether a cloud product can handle their data. It is being rebuilt right now: under FedRAMP 20x and the Consolidated Rules for 2026, the old Low, Moderate and High authorizations are giving way to certification Classes A through D, and new 20x certifications no longer need an agency sponsor to get started.

GovRAMP is a nonprofit that verifies cloud security for state and local governments, schools and other public bodies. It was called StateRAMP until February 2025, when it rebranded to reflect that its members include cities, counties, education and tribal governments, not just states. Its legal name is still StateRAMP, and some state laws and contracts still use the old name, so you will see both.

FedRAMP
GovRAMP
Run by
GSA's FedRAMP program office
StateRAMP, Inc. (dba GovRAMP), a nonprofit
Who relies on it
Federal agencies
Participating state and local governments, education and other public bodies
Control basis
NIST SP 800-53 Rev 5
NIST SP 800-53 Rev 5
Assessor
An accredited 3PAO
A 3PAO
Entry points
20x Classes A, B and C now open; Rev5 still accepted until June 11, 2027
Security Snapshot, then Core, Ready, Provisional or Authorized verification
Sponsor
Not required for 20x program certification
A government sponsor, or GovRAMP's Approvals Committee

Credit mostly flows one way

This is the part most vendors get wrong. A FedRAMP authorization gives you a shortcut into GovRAMP. A GovRAMP authorization gives you very little toward FedRAMP.

Going from FedRAMP to GovRAMP uses GovRAMP’s Fast Track. You become a GovRAMP member, then submit the security package and 3PAO assessment you already produced for FedRAMP, in FedRAMP format, along with your continuous monitoring data. GovRAMP’s review builds on that work instead of starting over. You still apply, and the fees are the same as the standard process, but you aren’t paying for a second full assessment.

Going the other way is harder. FedRAMP’s updated Class A rules, published in July 2026, accept a GovRAMP assessment from the past 12 months as one of the alternative frameworks a provider can use to qualify. That is real progress, but it is narrow. Class A covers non-sensitive use cases, FedRAMP describes it as transitional, and its own notice on outside frameworks says plainly that there is no bridge to the other classes and no reciprocity. To sell to an agency that needs Moderate-level protection, you still need a FedRAMP Class C or Rev5 Moderate certification.

The one-sentence version

FedRAMP opens GovRAMP’s door. GovRAMP gets you into FedRAMP’s lobby, at Class A, and no further.

Where states actually stand

State adoption is the reason GovRAMP matters, and it is moving fast. A few examples, checked against each state’s own documents:

  • Arizona is retiring its own program, AZRAMP, and will accept only GovRAMP or FedRAMP status. Since July 1, 2025, new contracts carry risk assessment requirements aligned with GovRAMP. The state says it won’t accept self-attestations, ISO 27001 certificates or SOC 2 reports in their place.
  • North Carolina began adding GovRAMP-aligned requirements to new executive-branch contracts with a cloud component on April 1, 2026, with an on-ramp period for vendors. From April 1, 2027, full compliance is mandatory for every contract with a cloud component, and existing contracts must align when they renew.
  • Texas runs its own program, TX-RAMP. State agencies and public universities can’t enter or renew cloud contracts without TX-RAMP certification. FedRAMP and GovRAMP holders can request certification through reciprocity at the matching level, but it isn’t automatic. You still have to apply to the state’s Department of Information Resources.
  • Nevada began adding GovRAMP requirements to new executive-branch cloud contracts on July 1, 2026.

The pattern is clear even where the details differ. More states are writing GovRAMP or FedRAMP into procurement, and they are phasing it in at renewal. A state customer that bought from you without either one may not be able to renew without one.

Read the solicitation, not the program website

Each state sets the required status level in the contract or solicitation, usually based on the data your product handles. One contract might accept GovRAMP Core; another might require Authorized within 18 to 24 months of award. Before you plan anything, pull the last three solicitations from the states you sell to and read what they actually required.

Which one first

The decision follows your customer mix. Here is how I would sequence it.

If your pipeline is mostly…
Start with
Why
Federal civilian agencies
FedRAMP
GovRAMP won't get an agency to Moderate. FedRAMP then fast-tracks you into GovRAMP when state deals arrive
State and local, no federal plans
GovRAMP
It's the authorization your buyers actually check, and a growing number of states require it at renewal
Texas public sector
TX-RAMP (via FedRAMP or GovRAMP reciprocity if you have one)
Texas requires its own certification. Reciprocity saves the assessment, not the application
A mix of federal and state
FedRAMP, then GovRAMP Fast Track
One full assessment covers both. Starting with GovRAMP means paying for a second full assessment later
Early, low-sensitivity federal pilots
FedRAMP 20x Class A
A recent SOC 2 Type II or GovRAMP assessment can qualify you. Plan for Class C if the pilot grows

The trap is the “mix” row. Teams with federal ambitions often start with GovRAMP because the first step looks smaller, then discover their first federal deal needs FedRAMP anyway. At that point they have paid for two assessments to end up where FedRAMP-first would have put them with one. For SaaS that will sell to federal civilian agencies, GovRAMP-first is often a false economy.

Cost and timeline

Neither program publishes an all-in price, and most numbers you will find come from vendors selling the work. A few anchors worth knowing:

  • GovRAMP says membership starts at $500 a year and that 3PAO assessments start around $70,000. In 2026 it launched a 3PAO discount program for providers that have completed a Progressing Security Snapshot or reached Core verification. Because GovRAMP has entry levels below full authorization, you can show progress to a state buyer before you finish.
  • FedRAMP doesn’t publish cost figures. Estimates from 3PAOs and advisors vary by an order of magnitude, depending on class, scope and how much of the work you have already done. The 20x process is designed to be faster than the old agency-sponsored path, which commonly took a year or more. It’s also new enough that few providers have gone through it end to end.
  • The biggest cost is usually your own team. Writing the system security plan, keeping continuous monitoring current and answering assessor questions take months of engineering and compliance time, whichever program you pick.

The way to control that cost is the same for both: keep evidence current all year, so continuous monitoring is a report you generate rather than a project you restart every month.

Where vCISO Lite fits

vCISO Lite runs your controls once against NIST SP 800-53 Rev 5, the catalog FedRAMP, GovRAMP and TX-RAMP all draw from, alongside the commercial frameworks you already hold, like SOC 2. Evidence is collected continuously and signed, so the package you hand a 3PAO and the monthly continuous monitoring report come from the same record. If you are deciding which authorization to pursue first, book a federal readiness demo and we’ll walk through it with your customer mix.

Where this matters next

Share this article:

Ready to build your security program?

See how easy it can be.